-
The MySign S Pulse Oximeter measures arterial oxygen saturation (SpO2), pulse rate and plethysmographic pulse waves. The monitor can be used as a portable or stationary device in emergency medical services, rescue situations, clinics, hospitals, nursing homes and outpatient settings. With it’s sophisticated design, the MySign S guarantees ease of use, outstanding robustness and exceptional performance.
Small, lightweight, ergonomic
Shock protected (IK 05)
Water protected (IP 54)
All-purpose mounting
2.8″ large, high-contrast and rotating display
Online Brochure -
VWSP-1000 - Ventway Sparrow - EMS
Weighing only 1kg, the Ventway Sparrow transport and emergency ventilator delivers high-performance ventilation previously unseen in such a lightweight and compact device. Built for transport and operated via a user-friendly interface, the Ventway Sparrow is the perfect solution for administering quick and efficient ventilation (invasive and non-invasive). It allows for smooth transitions from the point of injury to the emergency department or intensive care unit (ICU) and anywhere in between, the Ventway provides an unparalleled continuum of ventilation in one compact design.
-
The 7301 Eagle 1 Mask is a disposable single-patient use, Oro-Nasal masks intended to administer oxygen or other breathing gases into the upper airway for short term or emergency applications of noninvasive respiratory support or ventilation in hospital, transport vehicle, institutional or other clinical settings on patients that weigh > 30 kilograms. The Eagle 2 series mask has a supplemental, membrane-sealed port for use during insertion of a bronchoscope or other endoscopic device into the the patient’s airway while still administering oxygen and other breathing gases. This mask also has a hose barb and female luer integrated in the mask dome -
The 7302 Eagle 2 Mask are disposable single-patient use, Oro-Nasal masks intended to administer oxygen or other breathing gases into the upper airway for short term or emergency applications of noninvasive respiratory support or ventilation in hospital, transport vehicle, institutional or other clinical settings on patients that weigh > 30 kilograms. The Eagle 2 series mask has a supplemental, membrane-sealed port for use during insertion of a bronchoscope or other endoscopic device into the the patient’s airway while still administering oxygen and other breathing gases. This mask also has a hose barb and female luer integrated in the mask dome.
-
The M800 Handheld Pulse Oximeter combines many popular features into one compact, user-friendly design. It is equipped with adjustable alarms and also provides visual indicators on a bright 2.4″ OLED display. The M800 also features a gravity activated automatic display rotation for easy viewing in multiple orientations. This product is available from Maxtec with or without an optional rechargeable lithium-ion battery and cradle.
User-friendly design Adjustable audible and visual alarms High resolution, multi-directional 2.4″ color display Spot check and continuous monitoring modes Optional rechargeable lithium-ion battery & cradle Data storage capabilities
-
The all-new MaxFLO2 from Maxtec is an affordable method for mixing and monitoring air and oxygen. The MaxFLO2 is available in two models:High Flow and Low Flow. Each unit comes equipped with dual flow meters and a mixed gas analysis port for intermittent or continuous monitoring of FiO2. Gas ratios are visibly identified on the face of the unit to allow for fast, accurate flow settings.
-
Quiet operation for minimal patient stimulation
-
Ownership is considerably lower than cost of blenders & blender maintenance
-
24 month warranty
-
-
The Hans Rudolph Metro Seal™ is a disposable, medical adhesive and thermoplastic elastomer, tube securement device intended to hold securely in place on the patient’s face an accessory tube which is routed under a face mask and to thus enable a seal between the mask, tube and patient’s skin.The Metro Seal is intended to be used with any size Hans Rudolph oro-nasal mask when it is necessary to pass and secure an accessory tube (12 to 18 French) under the mask to the patient’s nasal or oral orifices from somewhere outside of the mask. The accessory tubes involved may include but are not limited to nasogastric tubes and esophageal balloon catheters. The associated masks involve applications for single and bilevel CPAP, Non-Invasive Ventilation, and other clinical or research settings by individuals that have received at least minimal instruction or training on the use of the Metro Seal as well as the device and system with which the Metro Seal is associated.
-
The Rescuer® II Compact CPAP System developed by BLS Systems is a state of the art non-invasive ventilator support system. Controlled airway pressure provides rapid relief for maximum patient benefit with minimal oxygen consumption.
Low cost, completely disposable and simple to use.
Highly efficient for longer cylinder life – runs between 4 to 8Lpm.
Lowest oxygen consumption of any disposable CPAP device.
Maximum protection – provides filtration on inhalation AND exhalation. -
The 6700 Series Mask Interface w/Anti-Asphyxiation valve & no leak - Bi-Level with AAV
Anti-Asphyxia Valve (AAV) for patient safety - allows patient to breathe room air if the flow device malfunctions. Valve opens at mask pressures less than 3cm H2O 360° Dual Swivel Elbow Port with Detachable Swivel Port for improved patient freedom of movement. Color coded translucent yellow.
-
The 6500 Series Mask Interface with No Anti- Asphyxiation Valve (for Critical Care Ventilators) NIV, No AAV.
Elbow shaped port in both 22mm outside diameter or 22mm inside diameter to allow for improved patient freedom of movement. Color coded translucent green.
![](https://thinkmdi.b-cdn.net/wp-content/uploads/2022/04/Ventway.png")
